Give you the best solution to reduce your project cost and ensure safe production
With machine vision as the core, it can provide intelligent equipment R&D, manufacturingand transformation services such as unmanned factories in the metallurgicalindustry and other industries, machine vision, and robot application design.
Our Core technology products
Ability to consistently provide products and services that meet customer and regulatory requirements.
A technology enterprise integrating R&D, production and service. It currently has 50 employees and 16 R&D personnel (including 2 doctors and 3 masters).
On March 31, 2022, LMM GROUP and Malaysian customers conducted two-way exchanges and discussions based on the technical issues of steel splitting counters. LMM GROUP technical engineers have provided technical answers to the steel bar counting system, which has been highly praised by Malaysian customers.
Our machine is automatic and will be installed in the middle of the third chain. The workflow is as follows:
1) The machine starts counting when the rebar is transferred to the third chain and passes through our machine counting area.
2) When the calculated number of bars is close to the target number, the system will send a chain deceleration signal to your PLC, and your PLC will control the third chain deceleration speed.
3) When the calculated number of reinforcing bars reaches the target number, the system will send a stop signal to your PLC, and your PLC will control the third chain to stop.
4) Counted rebar and uncounted rebar will stop at the rebar area, then a rebar line will appear, our machine will split the counted rebar and uncounted rebar.
5) After the steel splitting process, the next cycle will start.
LMM Answer: The annual production capacity for rolling 12mm rebar in a Chinese steel mill exceeds 1 million tons. Our machines are still running fine.
LMM Answer: When rolling bars of different diameters, the chain speed is the same, but our technicians will adjust the chain speed of each segment to make the machine match the production perfectly and achieve the best use effect.
That said, the speed of each chain is adjustable, especially for the third and second chain.
(Our machine is mounted on the third chain, this is your workshop site situation)
LMM Answer: Yes, our machine will send a “chain stop signal” to your PLC and your PLC will control your chain to stop quickly and steadily.
LMM Answer: Yes, if there are any issues, shut down the machine, then your existing manual counts can be supported. If you have any questions about using the system, please contact us. We will give guidance.
LMM Answer: Our machines are always upgraded based on user feedback and steel mill developments.
Hardware: light sources, cameras, etc. are constantly being upgraded.
Software side: Our engineers are always optimizing the algorithm. Our software is free to upgrade for our users.